News
All news
30 April 2019
2nd Rotomoulding Conference
A-type modules – based pontoons with decking
waiting for your questions
With A-type float modules you can manufacture pontoons with decking and a small bearing capacity, practically of almost any configuration allowing fastening the module frame to the pontoon framework.
The basis of pontoon construction are cast plastic floats without welding seams.
The float structure provides for grooves and recesses for decking installation and its fixation.
We offer several types of structures with the application of such floats.
These are ready-made pontoons with various bearing capacities which component parts of a large floating structure – quay, float bridge or a pontoon complex for recreation on water.
Procedure of modular pontoon assembly:
1 The float chains are made. The length and width apart is customary
2 The frame is installed into the grooves on the float framework
3 The frame is fixed with bolts
4 Decking is installed
Polyethylene floats are manufactured by rotational molding, devices do not have welding seams, the wall thickness is of 6 - 9 mm. Each float can bear the load of up to 250 kg with a draft of not more than 2/3 of the float height
The end product part is equipped with guides used to arrange float chains. Such structure provides a rigid fixation of floats at the base of a floating structure eliminating the possibility of float displacement against each other when they are used in self- propelled pontoons or at a high wave as a part of a stationery pontoon.
The upper part of floats have the grooves for the frame and joists installation for boarding as well as the holes to fix the frame and decking to the float framework.
The float structure provides for grooves and recesses for decking installation and its fixation.
We offer several types of structures with the application of such floats.
These are ready-made pontoons with various bearing capacities which component parts of a large floating structure – quay, float bridge or a pontoon complex for recreation on water.
Procedure of modular pontoon assembly:
1 The float chains are made. The length and width apart is customary
2 The frame is installed into the grooves on the float framework
3 The frame is fixed with bolts
4 Decking is installed
Polyethylene floats are manufactured by rotational molding, devices do not have welding seams, the wall thickness is of 6 - 9 mm. Each float can bear the load of up to 250 kg with a draft of not more than 2/3 of the float height
The end product part is equipped with guides used to arrange float chains. Such structure provides a rigid fixation of floats at the base of a floating structure eliminating the possibility of float displacement against each other when they are used in self- propelled pontoons or at a high wave as a part of a stationery pontoon.
The upper part of floats have the grooves for the frame and joists installation for boarding as well as the holes to fix the frame and decking to the float framework.
Related products
Make an application on the website and we will contact you in the near future, and answer all your questions.